AEG - Electrolux - Zanussi - Dishwashers
Date: 14th March 2008
Our quality control programme has identified that a connector component may be a potential risk of fire in some Electrolux, AEG-Electrolux and Zanussi-Electrolux dishwashers. Products bought before June 2006 are not affected. Models affected are listed in the table below.
The Model (Mod), PNC and Serial Number (S.N.) of the dishwasher are printed on the rating plate on the right side of the dishwasher door as indicated in the drawing. The location of the rating plate is also shown in the user instructions that came with the appliance. If the model number matches one in the table below and falls into the given serial range then the dishwasher is an affected model.
Only the following serial numbers are affected: 62400001 to 72399999 (*except AEG-Electrolux model F50765, serial numbers affected are 62400001 to 62799999 and 64100001 to 7079999 and 71700001 to 72399999)
Consumers owning one of these dishwashers should contact our Hotline on 0800 707 6258 between 8.00am and 6.00pm Monday to Friday, or between 9.00am and 5.00pm Saturday and Sunday, to arrange for a free-of-charge visit from a an engineer to rectify the fault.
Please note: If you are the owner of an affected model you must stop using your dishwasher and switch off the appliance. This safety notice does not affect any other Electrolux, AEG-Electrolux or Zanussi-Electrolux appliance. We apologise for any inconvenience this may cause and thank you for your co-operation.