AEG Zanussi / Electrolux Dishwasher
Electrolux DISHWASHERS Electrolux
OWNERS OF THE ABOVE APPLIANCES MUST ACT
IMMEDIATELY ON THIS SAFETY NOTICE.
A quality control programme has found that a purchased connector component presents a potential risk of fire in some series of AEG-Electrolux and ZANUSSI-Electrolux dishwashers. No product bought before July 2006 is affected. Models with this potential problem are listed in the table below.
The Model (Mod), PNC and Serial Number (S.N.) of the dishwasher are printed on the rating plate on the right side of the dishwasher door. The location of the rating plate is also shown in the user guide that came with the appliance.
If the model number matches one in the table below and falls into the given serial range then the dishwasher is an affected model.
Brand Model (Mod) PNC
AEG-Electrolux F50765 911916296
ZSF6161 S 911916240
ZANUSSI-Electrolux ZDF501 S 911516007
IZZI ALU 911915225
ZSF6161 N 911916260
ZSF6161 X 911916265
Only the following serial numbers are affected: 62700001 to 64099999 and 70800001 to 71699999
Consumers owning one of these dishwashers should contact their Hotline on
8.00am and 6.00pm Monday to Friday, or between 9.00am and 5.00pm Saturday and Sunday.
Please note: If you are the owner of an affected model you must stop using your dishwasher and switch off the appliance.
This safety notice does not affect any other AEG-Electrolux or ZANUSSI-Electrolux appliance.
They apologise for any inconvenience this may cause and thank you for your co-operation.
Source :- The National Press
15th June 2007